-
ACTION AREA
Display is flashing in addiction to the tempo and time signature settings you´ve done.
-
CONTROLLER
Tap in the tempo via the tap-button (1/4 note).
Hold the tap-button to neutralize.
Push and set your preferences.
Push and set your color/gap and time signature.
-
SEGMENT
Enter your preferred tempo in bpm or ms (depends on your preferences settings).
Tap or swipe up each segment to increase the value (+1).
Swipe down to decrease the value (-1).
Hold each segment to neutralize (0).
-
COLOR & GAP
Set the global default, accent 1 and accent 2 color settings (make a selection out of yellow/red/green/white and blue).
Assign default, accent 1, accent 2 or gap (black) to every single beat.
The quantity of the steps depends on the time signature settings you have made (1 to 64).
You can also change the quantity by hold (long pressed) any beat (1 to 64).
-
TIME SIGNATURE
Set your preferred time signature settings between 1/1 and 64/16.
Above you set the beats (1 to 64),
below you set the speed (1 = quarter / 2 = half / 4 = pre = tap button speed / 8 = double / 16 = quad).
Hold each button to reset (4/4).
Push and save or load your settings.
Push the button on the right and go back to the main view.
-
STORAGE
Push to save your current settings.
Push to delete your selection.
Push the button on the left and go back to .
Select a saved file by one click.
Recall a saved file by double click.
Rename a saved file by long pressed.
The storage listing is in alphabetical order.
-
PREFERENCES
Precounter - 0 to 4
Mode - set the whole device into bpm (beats per minute) or ms (milliseconds) mode.
Tok - sound on/off.
Display action - on/off (for example: off, when used with sound only).
Flash - tap-button flash on/off
Torch - enable/disable the torch functionality (when faster than 120bpm/500ms only the first beat is visible).
Vibration - enable/disable the vibration functionality (when faster than 120bpm/500ms only the first beat is noticeable).
Lefty - for better personal handling some of the buttons will change their position.
Visual is a simple to use optical metronome with an extreme contrasty pulse.
Set your time signature, color (default/accent1/accent2) and gap preferences.
Display changes between yellow/red/green/white/blue and black (gap).
Visual (free version)
Set your time signature (1/4 to 4/4)
Sound
Visual+ (advanced version)
Set your time signature (1/1 to 64/16 and all in between)
Sound
Storage
Torch
Vibration (android only)
Precounter
Mode
Lefty
The big plus of an optical metronome
+ you can stop follow and come back to the presetting later
+ unharmed your acoustic perception
+ no headphones required
+ multiple person use
+ no nerve and looks great
Use it alone or with your whole band, Visual will be „loud“ enough.
Visual is ad-free and without any access to your smartphone or tablet.